RobotStudio Machine Tending PowerPac 5.10
New Functions in RobotStudio Machine Tending PowerPac 5.10
RobotStudio Machine Tending PowerPac 5.10 is based on RobotStudio 5.10
The release name is RobotStudio Machine Tending PowerPac 5.10.
The release contains the following deliverables:
q RobotStudio Machine Tending PowerPac 5.10 CD
o Available in English and Chinese
q Operating manual RobotStudio Machine Tending PowerPac 5.10
o available in English
The information should be considered as last minutes information and most up-to-date:
q Previous installations of RS Machine Tending PowerPac or RS Plastics Sales Tool must be removed prior to installation. Choose Control Panel->Add/Remove Program to remove it. After that, the RS Machine Tending PowerPac can be installed.
q The event handling, such as machine open/close, will not work if the RAPID program is synchronized with the Virtual controller without using the synchronization function of RS Machine Tending PowerPac
q The cycle time measurement of RS Machine Tending PowerPac differs slightly compared with the measurement of RobotStudio. The total run time difference is in scale of 0.5 – 1 s.
q The user needs to log in as administrator to use the “Customization” function
q If the result from “Automatic path configuration” is not satisfactory, the path can be manually configured with RobotStudio base function. The “Synchronization” function from Machine Tending PowerPac must be used to ensure correct logic interaction between robot and stations/tools.
q When the opening/closing of the machine or picking/releasing of part can not be performed correctly, then choose stop simulation, and then restart simulation to solve the problem.
q Corner path failure may occur during simulation, but this will not stop the simulation.
The release date is 2008-01-09
To order RobotStudio Machine Tending PowerPac:
q In Order procedure - Industrial Software Order Form mark RobotStudio Machine Tending PowerPac
See the Operating manual RobotStudio Machine Tending PowerPac.
This section describes the changes that have been made between releases of RobotStudio Machine Tending PowerPac.
The main new features compared with RobotStudio Machine Tending PowerPac5.09.01, are:
q Automatic Collision Detection during simulation
q The user can select configuration data for the first move instruction in the current cycle, as different configuration data may give different cycle time.
q Export and import function for customized stations/tools/parts. Users can share and/or backup/restore their customized stations/tools/parts
q Improved ability to directly use customer’s part in the Machine Tending Power Pac